|
|
|
|
Heat detecting & Triggering sensors |
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
EN CONSTRUCTION BIENTÔT DISPONIBLE |
|
|
|
|||||||||||||||||
|
|
USP-101 Triggering Sensor |
|
|
|
|||||||||||||||||
|
|
TECHNICAL SPECIFICATIONS:
Length (H) – 3.35” Diameter (D) – 2.6” Diameter (d1) – 2.17” Diameter (d2) – 0.18” Total mass – 0.44 lbs Surface protected by one device is up to 270 ft². The device generates an electric impulse with amplitude of 3.5 V DC and duration no less than 3.0 ms at a circuit resistance of 1.0 Ohm. The device can activate the following types of electrical initiators: MB-2H, 3A-1, PP-9, YGP-10, and similar. Maximum relative humidity is – 98% (no condensation)
PRODUCT RANGE:
USP-101 comes in five different models. Four models are operated automatically similarly to the thermal detectors with rated temperatures of 45°C, 72°C, 93°C, 110°C +/- 5C°.
Model USP-101-R is designed for the manual actuation of the fire extinguishers.
One sensor is capable of monitoring a protected area of up to 270 ft2 |
|
|
||||||||||||||||||
|
|
|
|
|
||||||||||||||||||
|
|
|
|
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|||||||||||||||
