Products - Inside-Ceiling Install Kits

MPP 2.0 (N) Inside-Ceiling Install Kit

MPP 2.0 (N) Inside-Ceiling Install Kit contains TUNGUS MPP 2.0 (N) module pre-wired with USP-101 72°C and attached to the special bracket which can be easily fitted and fasten between standardly spaced joists either at 12“or 16“.

Hardware required for fastening of the bracket to the joist is included. White plastic screw head plugs are included to hide the inserted screws. Bottom plate of the bracket is painted white to match most of the ceilings. However, it can be re-painted to any colour as long as the tip of the heat detecting/triggering sensor is not painted. The discharge nozzle is sealed with cover to prevent foreign object entering the nozzle and for esthetic purposes.

MPP 2.0 (N) Inside-Ceiling Install Kit is designed for hidden installation in order to protect kitchen stove, kitchen counter, fireplace or woodstove in living room, bedroom, laundry room, finished basement with suspended ceilings, etc. Simply in any place where the fire protection system should not be visibly installed on the ceiling.

MPP 2.0 (N) Inside-Ceiling Kit has capacity to protect the entire room with square footage of up to 270 ft² and 1,342 ft³. If equal protection of the entire rroom is required, the best results is achieved when the modules is installed iinside the ceiling in the centre of the room. If mainly certain fire hazard spot protection is required, the best result is achieved when the module is installed inside the ceiling right above the fire hazard spot.