Products - Do-It-Yourself Installation Kits







MPP 6.0 Kit





Do-It-Yourself Installation Kit MPP 6.0 - Powder contains TUNGUS MPP 6.0 module  pre-wired with USP-101 triggering sensor, mounting bracket base TCB-30-3, angle bracket TCB-10-1 and hardware required for the module and triggering sensor installation.

TUNGUS MPP 6.0 module can be installed vertically using mounting bracket base TCB-30-3 on flat horizontal ceiling, joist, beam or angled using angle bracket TCB-10-1 on sloped ceiling, joist, beam as may be required by the application

MPP 6.0 module has capacity to protect the entire room with square footage of up to 538 ft2 and 5,297 ft3. If equal protection of the entire rroom is required, the best results is achieved when the modules is installed on the ceiling in the centre of the room. If mainly certain fire hazard spot protection is required, the best result is achieved when the module is installed on the ceiling right above the fire hazard spot.















MPP 6.0 Kit Package


















Previous Page


Next Page