Products - Do-It-Yourself Installation Kits







MPP 4.0 Kit





Do-It-Yourself Installation Kit MPP 4.0 - Powder contains TUNGUS MPP 4.0 module  pre-wired with USP-101 triggering sensor, mounting bracket base TCB-30-3, angle bracket TCB-10-1 and hardware required for the modules and triggering sensor installation.

TUNGUS MPP 4.0 module can be installed vertically directly on flat horizontal ceiling, joist or beam using the mounting bracket base TCB-30-3 or on sloped ceiling, joist or beam using additional angle bracket TCB-10-1 as may be required by the application.

MPP 4.0 module has capacity to protect the entire room with square footage of up to 430 ft2 and 3,531 ft3. If equal protection of the entire rroom is required, the best results is achieved when the module is installed on the ceiling in the centre of the room. If mainly certain fire hazard spot protection is required, the best result is achieved when the module is installed right above the fire hazard spot.















MPP 4.0 Kit Package


















Previous Page


Next Page